BUILDER GEL № 03 Bare – Natural – medium consistency modeling gel. Easy to control during application, self-leveling and forms a smooth surface without ridges, allowing you to model “to readiness” without filing.
Thanks to the right balance of strength and elasticity, it is durable and wearable.

Suitable for leveling, strengthening, and extension.

Advantages:

• Medium consistency – comfortable working speed.
• High self-leveling – modeling “to readiness,” less filing.
• Balance of strength and elasticity: resistance to cracks, chips, and delamination during wear.
• Minimal filing after polymerization.
• Comfortable polymerization – reduced heat generation* (*with correct layer thickness).
• Compatibility – works with bases/primers of most systems.
• Safe formula: TPO-free.

Technical characteristics:

• Type: modeling gel
• Consistency: medium
• Self-leveling: high
• Elasticity: moderate
• Hardness: high
• Dispersion: sticky layer present after polymerization
• Polymerization: LED – 60-90 sec. / UV – 120-180 sec.
• Volume: 30 ml.

Recommendations for use:

1. Prepare the nail plate (chemical/mechanical preparation).
2. Apply a thin layer of SCOTCH BASE with rubbing motions.
3. Apply the first thin layer of gel as a base with rubbing movements, then a larger drop for modeling (allow the gel 1–3 sec. to self-level).
4. Polymerization: LED – 60-90 seconds / UV – 120-180 seconds.
5. Remove the dispersion layer, perform minimal filing if necessary.
6. Cover with color/top coat according to the technology.

Precautions:

Avoid contact with skin. Store in a tightly closed container at a temperature between +5°C and +25°C. Keep away from light and children. The material is sensitive to UV/LED rays – during work or content shooting, do not leave it open under the influence of lamp light or sunlight to avoid premature polymerization. Use only as directed.